Language & Currency:
EN / EUR
Language
Currency
  • USD
  • EUR
  • BGN
0
Language & Currency:
EN / EUR
Language
Currency
  • USD
  • EUR
  • BGN
  •    

Find Products By

Search

Infrared heater for outdoor use Fiore 1800W, IP65

Electric infrared heater 1800W Fiore is the product of the first patented worldwide technology to waterproof infrared radiation with a level of moisture protection IP65. Fiore 1800W can warm up quickly , even with a cold wind. Economical heater works on the principle of the Sun - by infrared rays. Thanks , which is much more economical in comparison with external gas heating. Because of its high moisture resistance , does not require the coated glass , so that virtually no heat loss .

Infrared heaters for outdoor areas have many applications : restaurants, bars, pubs , discos, restaurants, hotels, porches , terraces , gardens , churches , warehouses , farms , greenhouses and much more. Their economy, ease of use and their high energy efficiency make them a preferred heater.

All products are certified by IMQ and meet the most stringent European requirements .

This product can be found and bought in the show-room of InfraHEAT in Sofia, Bulgaria, located on 85 "Tzar Boris" blvd. tel. 0876 800 255.

Quantity:
Price:€171.80

Fourchannel controller for mixing circles with motors

Purpose:

The device is designed to drive motor actuators for mixing valves, according to the temperature supplied to the premises supplied by the respective mixing circuit. Able to manage two-position three and one analog actuator 0-10 V. Suitable for buildings where there are one to four rounds, and convectors, underfloor, radiator heating and domestic hot water.

Quantity:
Price:€174.25

System for building control - base module

Purpose:

The device is designed to control and monitor multiple temperature points. Each module has 10 inputs for Pt1000 temperature type or independent contacts thermostat and 10 relay outputs for each temperature point and one output for a command to the central source. The device is able to select a mode for heating or cooling according to user needs . In heating mode has antifreeze function of the heating system . Through weekly programmer can maintain different temperatures in each day of the week, with the possibility of up to four time zones per day.

Quantity:
Price:€176.71

Electronic Humidity Controller RH-1.4

Application:

The Electronic Humidity Controller is designed to measure and keep the relative humidity of air or gases in the range of 0-100%

 

Quantity:
Price:€177.93

Electronic Humidity Controller RH-2.6.2

Application:

The Electronic Humidity Controller is designed to measure and keep the relative humidity of air or gases in the range of 0-100%.

Quantity:
Price:€177.93

Protracted ventilation system ECO-SVEJEST

The compact ventilation system ECO-SVEJEST is designed for local ventilation of residential and office buildings. It creates microclimate in the rooms through delivery of fresh air. As the air goes through system of filters, it is been cleared-uo of dust, bacterias, car gases etc. If needed, he incoming air can be heated during the winter days to room temperature. There is a system, that controls the humidity, keeping it under 75%, which lowers the process of over humidification and aging of the rooms, preventing tham to gain mold and must. The added ionisator helps the air to be full of negative powered ions, which helps killing the bacteria.

Price:€178.95

Compact heat meter with temperature sensor Qundis G21-MID

Compact heat meter, turbine type, working with battery and measuring panel
rotating angle of 270 °.

Price:€179.81

Diesel Fuel Transfer Pump PANTHER DC 12/24 V

Made to complete the Panther range for transferring diesel fuel, these pumps are of the rotary vane type, self-priming, with high flow rate and easy operation and installation.


Besides featuring an integrated bypass valve and suction filter, they are also equipped with a mechanical seal that ensures a high standard of reliability even at low operating temperatures.


The version 24/12 can be used with both tension.
Compact, safe and reliable, they can be fitted to earthmoving machines, mobile dispensers on motor vehicles and fixed dispensers in case only battery power is available.

Price:€181.00

Fuel (Diesel and Oil) Mechanical Meter K33 & K44

K33 and K44 are nutating-disk meters that measure the exact quantity of the dispensed fuel or lubricant. They are designed for non-commercial use only. These flow-meters are reliable, inexpensive, easy to install and simple to calibrate on the workplace.

 

The Pulser model is fitted with a pulse emitter for connection to a fuel management system.
Thanks to reduced flow resistance, they can also function by gravity.



Performance Specifications

 

  • Flow-rate (range): 20÷120 l/min (5,3÷32 gal/min).
  • Precision: ±1% of flow range after calibration.
  • Repeatability: 0,2%.
  • Max. operating pressure: 10 bar (142 psi).
  • Bursting pressure: 30 bar (426 psi).
  • Readout system:
    • K33, 3-digit subtotals (max 999 litres), 6-digit totals.
    • K44, 4-digit subtotals (max 9999 litres), 7-digit totals.
  • Resolution: 0.1 litre.
  • Pulser card type: “Open collector”, frequency: 10 pulses/litre, power supply: 6-24 V DC, max 10 mA.
Price:€181.00
Price:€181.00
Page 29 of 50