Soler & Palau

• Fan ON/OFF and speed selector I/II rotary switch.
• Max current rating 12 A.
• LxAxH (mm): 84 x 37 x 81

Axial flow fans for wall or ceiling installation, designed to solve ventilation problems in small rooms and bathrooms.

 
The motors from the SILENT range are mounted on silent-elastic-blocks which absorb the vibrations. In this way not only is the noise from the extractor significantly reduced but so too is the noise from the surface which supports it.

 
Additionally, the motors from the SILENT range are equipped with ball bearings which guarantee long life working (more than 30.000 working hours) at any shaft positions.

 
The SILENT range consists of three different models: SILENT-100, SILENT-200 and SILENT-300, available with different integrated control options to accommodate all application requirements.

Range of axial extractors with airflow performances range from 80 up to 200 m3/h, for connection to 100 mm (EDM-800 and EDM-100) and 120 mm (EDM-200) diameter circular ducting. Back draft shutter.

All the fans are manufactured from injection moulded plastic, fitted single phase 230V-50Hz, class B motor equipped with overload thermal protection. All the fans are class II insulation, IP44 rated and suitable to operate with air temperature up to 40 єC.

The HCM-N series of circular plastic axial fans are designed to be mounted in windows or walls for the direct extraction of air to the outside environment. The HCM-N series are available in 3 nominal model sizes 150, 180 and 225.

HCM-150 Extraction rate: 400m3 per hour. (110l/s)
HCM-180 Extraction rate: 600m3 per hour. (165l/s)
HCM-225 Extraction rate: 900m3 per hour. (250l/s)

HCM-150 Mounting hole size: 183-188mm
HCM-180 Mounting hole size: 220-225mm
HCM-225 Mounting hole size: 262-276mm

Physically, the OUTSIDE diameters are as follows:
HCM-150 214mm
HCM-180 255mm
HCM-225 298mm

All models include 1ph 230V 50hz motors, inlet finger guards and integrated louvre backdraft shutters as standard.
All models are suitable for use with S&P electronic speed controllers and installation accessories.

Range of centrifugal extractors specifically designed for the extraction of moist, grease laden air and fume from under domestic cooker canopies. All the models are fitted with single phase motors.

The efficiency and of the kitchen extractors depends on the maintenance and cleaning of the centrifugal impeller. All the S&P extractor parts are easily removable and can be cleaned in the dishwasher. At the foot of the fan, there is a drawer for gathering oil from the air. This drawer can be cleaned easily.

Low profile "Mixed-flow" fans with sound-absorbent insulation. Extremely quiet. Manufactured in plastic material, with a specifically designed internal skin to direct the sound waves in the right angle for them to be captured by the sound-absorbent material. Fitted with rubber gaskets on the inlet and outlet to absorb vibrations, a body that can be dismantled. Connection box can be rotated 360є, to facilitate easy connection of the power cable.

Speed controlable 230 V 50 Hz motor, of two speed motors. Motors are IP44, class B, with ball bearings and safety thermal overload protection.

Range of centrifugal extractors specifically designed for the extraction of moist, grease laden air and fume from under domestic cooker canopies. All the models are fitted with single phase motors.

The efficiency and of the kitchen extractors depends on the maintenance and cleaning of the centrifugal impeller. All the S&P extractor parts are easily removable and can be cleaned in the dishwasher. At the foot of the fan, there is a drawer for gathering oil from the air. This drawer can be cleaned easily.

The CK 60 F Fan has a metallic teflon coated filter - fitted to the inlet to prevent the build-up of grease within the fan and ducting enclosure.