Home fans

• For intermittent or continuous ventilation of bathrooms, toilets, kitchens or utility rooms in domestic or commercial properties.
• Motor with sheilded poles, with bearings, and thermal cut-out.
• Data and performaces IMQ Performance certified.
• High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
• IPX4 splashproof protection.
• Motor support and grille made of anti-UV ABS.
• Available in three outlet sizes: ∅ 100, 120 and 150 mm.
• Conforms to the following standards: CEI EN 60335-2-80 (Part 2: Particular requirements for fans), CEI EN 60529 (Code IP) and CEI 107-53/1986.
• Design: F. Trabucco & Associates

The HCM-N series of circular plastic axial fans are designed to be mounted in windows or walls for the direct extraction of air to the outside environment. The HCM-N series are available in 3 nominal model sizes 150, 180 and 225.

HCM-150 Extraction rate: 400m3 per hour. (110l/s)
HCM-180 Extraction rate: 600m3 per hour. (165l/s)
HCM-225 Extraction rate: 900m3 per hour. (250l/s)

HCM-150 Mounting hole size: 183-188mm
HCM-180 Mounting hole size: 220-225mm
HCM-225 Mounting hole size: 262-276mm

Physically, the OUTSIDE diameters are as follows:
HCM-150 214mm
HCM-180 255mm
HCM-225 298mm

All models include 1ph 230V 50hz motors, inlet finger guards and integrated louvre backdraft shutters as standard.
All models are suitable for use with S&P electronic speed controllers and installation accessories.

• For intermittent or continuous ventilation of bathrooms, toilets, kitchens or utility rooms in domestic or commercial properties.
• Motor with sheilded poles, with bearings, and thermal cut-out.
• Data and performaces IMQ Performance certified.
• High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
• IPX4 splashproof protection.
• Motor support and grille made of anti-UV ABS.
• Available in three outlet sizes: ∅ 120 and 150 mm.
• Conforms to the following standards: CEI EN 60335-2-80 (Part 2: Particular requirements for fans), CEI EN 60529 (Code IP) and CEI 107-53/1986.
• Design: F. Trabucco & Associates

• Long Life ball bearing motors which are guaranteed for 30,000 hours continuous, trouble free operation.

Two models:

• Base Ariett LL - Centrifugal bathroom fan with long life motor
• Ariett LL Timer - Centrifugal bathroom fan with long life motor and timer

Characteristics:

• Suitable for wall and ceiling installation.
• For intermittent extract of shower rooms, en suites, w.c's.
• Suitable for ducting up to roof tile vents.
• Contains integral backdraught shutter.
• Two speeds.
• IPX4 splash proof protection on all models.

• The standard models can be speed regulated.
• Timer models are adjustable from 3 to 20 minutes.

• For intermittent or continuous ventilation of bathrooms, toilets, kitchens or utility rooms in domestic or commercial properties.
• Motor with sheilded poles, with bearings, and thermal cut-out.
• Data and performaces IMQ Performance certified.
• High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
• IPX4 splashproof protection.
• Motor support and grille made of anti-UV ABS.
• Available in three outlet sizes: ∅ 100, 120 and 150 mm.
• Conforms to the following standards: CEI EN 60335-2-80 (Part 2: Particular requirements for fans), CEI EN 60529 (Code IP) and CEI 107-53/1986.
• Design: F. Trabucco & Associates

• For intermittent or continuous ventilation of bathrooms, toilets, kitchens or utility rooms in domestic or commercial properties.
• Motor with sheilded poles, with bearings, and thermal cut-out.
• Data and performaces IMQ Performance certified.
• High airflow rate, low operating noise level and low power consumption due to the wing profile blades and motor support.
• IPX4 splashproof protection.
• Motor support and grille made of anti-UV ABS.
• Available in three outlet sizes: ∅ 100, 120 and 150 mm.
• Conforms to the following standards: CEI EN 60335-2-80 (Part 2: Particular requirements for fans), CEI EN 60529 (Code IP) and CEI 107-53/1986.
• Design: F. Trabucco & Associates

• Attractive design
• One fan for any room and any type of installation: wall, ceiling and in-duct installations
• Continuous running in accordance with ADF System 3
• 3 levels of performance: 5 l/s or 10 l/s (low speed) and 15 l/s (boost)
• Very quiet operation
• Constant airflow control ensures the nominal performances in a wide range of alternative situations
• IPX4 splash proof protection
  
   

2 models available:

• Vort Notus (for wall, ceiling and in-duct installations)
• Vort Notus THCS, equipped with timer and R.H. (humidity) sensor (for wall and ceiling installations)
   

DUCT TO USE: Suitable for use with 100mm diameter ducting up to 3.5 metres with 1 bend

Designed for air extraction from wet and dry premises.

• Long Life ball bearing motor which is guaranteed for 30,000 hours continuous, trouble free operation.
• Thermal protection.
• Two speeds.
• IMQ certified.
• Double box, specially designed fins and engine, anti-vibration rubber, protection from air flowing backwards - guaranteed quiet operation.
• In compliance with EN 60335-2-80, splash proof protection IPX4 and IEC 60529.
   

Design: Е. Trabucco - M. Vecchi

The compact ventilation system ECO-SVEJEST is designed for local ventilation of residential and office buildings. It creates microclimate in the rooms through delivery of fresh air. As the air goes through system of filters, it is been cleared-uo of dust, bacterias, car gases etc. If needed, he incoming air can be heated during the winter days to room temperature. There is a system, that controls the humidity, keeping it under 75%, which lowers the process of over humidification and aging of the rooms, preventing tham to gain mold and must. The added ionisator helps the air to be full of negative powered ions, which helps killing the bacteria.

The compact ventilation system ECO-SVEJEST is designed for local ventilation of residential and office buildings. It creates microclimate in the rooms through delivery of fresh air. As the air goes through system of filters, it is been cleared-uo of dust, bacterias, car gases etc. If needed, he incoming air can be heated during the winter days to room temperature. There is a system, that controls the humidity, keeping it under 75%, which lowers the process of over humidification and aging of the rooms, preventing tham to gain mold and must. The added ionisator helps the air to be full of negative powered ions, which helps killing the bacteria.